 |
| so, after xmas and new year, managed to get some time on the car last weekend... Marking the door handle move cutout |
 |
| cut out and grinded |
 |
| handle holder spot welded in place |
 |
| Started work on lowering the wipers....I am gunna have to move the wiring loom and the brake pipes.. |
 |
| Remove this piece of plastic that secures the wiring loom, after some prising, I found 2 bolts holding in on.. |
 |
| This is looking from under the wing at the back of the loom plastic, the 2 round shapes are the bolts that are holding it on, the round hole has a tie-wrap to snip |
 |
| Out at last!! |
 |
| here you can see one of the bolt threads.... |
 |
| wiper assembly removed |
 |
| initial cut out, i did more trimming as I went along to get it to fit |
 |
| it fits!!! |
 |
| Had to bend this arm with a hammer where the marks are...it rotated OK after this...will leave the last metal bar from the strut until I have the windscreen on.. |
No comments:
Post a Comment