 |
| Here are my driveshafts after being modded, top one is ready for painting, bottom one is painted |
 |
| This is the new Extreme top mount fitted NOTE!! I have since been told that this is wrong, the bearing should be towards the outside of the car (to the bottom of this pic), its simple enough to spin it round and remove a part of the hole for the bearing to sit in |
 |
| wheel hub back on, this also shows the modified wishbone and driveshaft refitted |
 |
| disk and caliper back on...yes, i am refitting my old disks at this time, I will replace all four before I finish! |
 |
| new front suspension installed and wheel back on, still on jacks |
 |
| wheel now on the ground! I have now sent her off to Auto Transformations for bodying up and spraying. This is due to the fact that I didnt have enough confidence to attempt the bodywork myself and, as I have invested a lot of money in this, wanted it to look as close to perfect as possible, I wouldnt be able to do that! I hope to get pics from them as they move the build forward and I will post them here for you guys to see. |
